Keyless Entry Transmitter Remote GM Parts 22936098 OEM FACTORY, FREE SHIPPING!

Description

NEW OEM FACTORY GM Keyless Entry Remote/Transmitter/Fob. Bought 2 months ago for a vehicle I had, but never programmed or used before vehicle was sold. Buyer responsible for programming. Fitment notes/general programming:
GM
2006-2017 Buick Enclave
2006-2011 Cadillac DTS
2007-2014 Cadillac Escalade
2007-2013 Chevrolet Avalanche
2011-2015 Chevrolet Captiva Sport
2007-2010 Chevrolet Equinox
2003-2021 Chevrolet Express
2006-2013 Chevrolet Impala
2006-2007 Chevrolet Monte Carlo
2007-2013 Chevrolet Silverado
2007-2014 Chevrolet Suburban
2007-2014 Chevrolet Tahoe
2009-2017 Chevrolet Traverse
2007-2017 GMC Acadia
2003-2017 GMC Savana
2007-2014 GMC Sierra
2011 GMC Terrain
2007-2014 GMC Yukon
2008-2009 Hummer H2
2007-2009 Pontiac Torrent
2007-2010 Saturn Outlook
2008-2010 Saturn Vue
2007-2009 Suzuki XL7
NOTE:
2011 & newer vehicles must be programmed by an automotive locksmith or dealership.
Procedure #1
THIS PROCEDURE IS FOR VEHICLES WITH THE DRIVER INFORMATION CENTER. IT WILL BE A BUTTON TO THE RIGHT OF THE STEERING WHEEL WITH A VEHICLE ICON AND THE LETTER i.
1. Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)
2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press the set/reset button (button will have a check mark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is now in programming mode.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.
Procedure #2
THIS PROCEDURE IS FOR VEHICLES WITHOUT THE DRIVERS INFORMATION CENTER.
1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).
2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.
3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will be heard indicating successful programming.
5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.